SCB |
Chrome Base |
 |
SLB |
Silver Base |
 |
D |
Convert Operator to Draughtsman |
|
ILS |
Lumber Support |
|
AB Arms |
Small Hoop Arms |
 |
AC Arms |
Large Loop Arms |
 |
AD Arms |
Chrome Stem Arms |
 |
AE Arms |
Silver/Black Arms |
 |
AA Arms |
Height Adjustable Arms
Press and hold the button on the outer (or front of arm) to move arm up or down, when released arm will lock into place. |
 |
*AAW Arms |
*Fully Adjustable Arms
The fully adjustable arms are on selected chairs. These are adjustable by height, Press and hold the button on the outer (or front of arm) to move arm up or down, when released arm will lock into place. Also the width can be adjusted by loosening the little wheel under the seat. Set the width you require, then tighten. |
 |
SS |
Seat Slide Option on Mechanism
To operate this function, lift bar under front of seat, this will enable you to slide seat forward or back. When happy with position release and it will lock into place. This is ideal for someone long in the leg, as this feature will give more support. |
 |
| |
Forward Tilt
The forward tilt is operated by a lever (labelled either with a diagram or the word tilt or seat) found under the seat to one side. Lift the lever to enable to select the position required, then push back down to lock into position. |
 |
| |
Inflatable Lumber support< br/>The inflatable lumber support is fitted on selected models as standard and is integrated into the back cushion. The air cell can be inflated and deflated through a hand bulb attached to the back of the chair. To inflate pump bulb in palm and to deflate turn silver valve to release air. |
 |
Mechanism 1 |
Independent Back Rake
Instant release lever for backrest adjustment. To operate the independent back rack, lift the lever (labelled either with a diagram or the word back) found under the seat. Adjust to the position you require then push down to lock. |
 |
Mechanism 2 |
Asyncron Seat and Back
Instant release lever for backrest rake adjustment and independent seat tilt lever. |
 |
Mechanism 3 |
Asyncron Seat and Back
Instant release lever for backrest rake adjustment and independent seat tilt lever with tension control. The mechanism has a finger tip control back height adjustment operated by lifting the back to one of the five settings. This is a ratchet mechanism when at desired height will lock in. If you lift to the top of the adjustment (i.e. the fifth position) the back will reset to the lowest position. |
 |